1 PANEL DESCRIPTION
u 2/5TONE INDICATOR
Appears when the specified
i ALPHANUMERIC DISPLAY
Displays the CH number,
NOTE: When the alphanumeric display blinks and trans- mitting becomes impossible, check that the DC battery voltage has not dropped below 8 V or that the antenna is not tuned properly or the antenna connection is faulty.
■Programmable function keys
The following functions can be assigned to [P0], [P1], [P2], [P3], [ ] and [] programmable function keys.
Consult your Icom dealer for details concerning your trans- ceiver’s programming.
In the following explanations, programmable function names are bracketed. The specific switch used to activate the func- tion depends on programming.
¡CH UP AND DOWN KEYS
CH UP ➥ Select an operating channel.
➥Select a transmit code channel after pushing
CH DN
the [TX CH] key.
➥Select a DTMF channel after pushing the [DTMF] key.
➥Select a scan group after pushing and holding the [SCAN] key.
¡BANK KEY
BANK Select and determine a bank number.
•When the optional
3