14
4
CONNECTION AND MAINTENANCE
qANTENNACONNECTOR
Connects to an antenna. Contact your dealer about an-
tenna selection and placement.
wMICROPHONE HANGER
Connect the supplied microphone hanger to the vehicle’s
ground for microphone on/off hook functions. (See p. 2)
eDC POWER RECEPTACLE
Connects to a 12 V DCbattery. Pay attention to polarities.
NEVER connect to a 24 Vbattery. This could damage the
transceiver.
rOPTIONALCABLE (OPC-617)
Connect an external modem unit, dimmer control, etc.
tEXTERNALSPEAKER JACK
Connect a 4–8 Ωexternal speaker, if desired.
■Supplied AccessoriesqMicrophone ...................... 1
wMicrophone hanger and
screw set ..................... 1 set
eMicrophone hanger cable . 1
rDC power cable (OPC-1194)
............................................1
tFunction name stickers*
(KEYSTICKER) ....................1
yMounting bracket .............. 1
uBracket bolts ..................... 4
iMounting screws (M5×12). 4
oSelf-tapping screws (M5×20)
...........................................4
!0Flat washers ...................... 4
!1Spring washers ................. 4
!2Nuts ................................... 4
*Function name stickers
There are no names on the programmable function keys since the
functions can be freely assigned to these keys.
Attach the supplied function name stickers above the appropriate
keys for easy recognition of that key’s assigned function.
qw e
r
yu
i
o
!0 !1 !2
t
KEY-STICKER
ICOM
IC-F110_F210_EUR-1.qxd 03.2.5 3:31 PM Page 14 (1,1)