Icom IC-F110 ¡ Scan START/STOP KEY, ¡ Scan TAG KEY, ¡ Priority Channel Keys, ¡ Monitor KEY

¡SCAN START/STOP KEY

SCAN A Push this key to start scanning; and push again to stop.

SCAN B

NOTE: Place the microphone on hook to start scanning.

Take the microphone off hook to stop scanning.

¡SCAN TAG KEY

TAG	Adds or deletes the selected channel to the scan
	group.

¡PRIORITY CHANNEL KEYS

PRI A	Push these keys to select priority A or priority B
	channel, respectively.
PRI B

¡OPERATING CHANNEL KEYS

CH1 Select an operating channel directly.

CH2

CH3

CH4

PANEL DESCRIPTION 1

¡MONITOR KEY

MONI Activates one of (or two of) the following functions

on each channel independently:

•Push and hold the key to unmute the channel (audio is emitted; ‘Audible’ condition).

•Push the key to toggle between the mute and unmute conditions (toggles between ‘Audible’ and ‘Inaudible’).

•Push the key to mute the channel (sets to ‘Inaudible’ only).

•Push the key to unmute the channel (sets to ‘Audible’ only).

•Push the key after communication is finished to send a ‘reset code’.

NOTE: The unmute condition (‘Audible’ condi- tion) may automatically return to the mute con- dition (‘Inaudible’ condition) after a specified period depending on the pre-setting.

¡LOCK KEY

LOCK	Push this key for 1 sec. to lock all programmable
	keys except the following:

•[CALL] (incl. [CAL A] and [CAL B]), [MONI] and [EMER] keys.

4