Step, To activate the additional options | Miele W 1903 specification

Programmable options

To activate the additional options:

Turn off the machine, close the door, and release all pushbuttons. Set the programme selector switch to “Start/Finish”.

Carry out steps 1 and 2 within 4 seconds.

Step 1:

Press the “ON/OFF” button

Step 2:

Press the “Water plus” button 4 times (i.e. press in and out twice)

The “On” LED will light up and the “Pre-wash” and “Main-wash” hights will flash.

If this does not occur, press the “ON/OFF” button to switch the machine off and repeat step 1 and 2.

22

Image 22

Miele W 1903 instruction manual Step, To activate the additional options

Contents

For washing machine W Contents Guide to the machine Detergent dispenser drawer Important safety instructions Disposal of the packing ma- terial Help protect our environmentDisposal of your old machine Economical usage Economy Before using for the first time Water hardness reminder Pre-treating the laundry Preparing the laundrySort the laundry Loading the machine Textile care symbols Too little detergent can result Adding detergentFor small loads Too much detergent can result Adding fabric softener Starch Programmes Cottons Max load Kg 4.5 lbs Max spin 900 rpm Normal run time Permanent PressShort run time 50 min Delicates Woollens Max load 1.0 kg 2.2 lbs Max spin 900 rpm Run time 48 min Drain SpinQuick Wash 40C Additional options Changing the programme sequence End of Programme After washing High water level only in Cottons rinses Programme Lock Child safety featureProgrammable options 5th Rinse in the Cottons programme Step To activate the additional options Programmable options Then Deleting the additional op- tions Cleaning the washing machine User Maintenance Instructions Cleaning and CareCleaning the detergent drawer Cleaning and Care Cleaning the drain pump and lint trap Cleaning and Care To clean the filter in the inlet hose Cleaning the water inlet filterTo clean the filter in the inlet valve Selected programme does not begin Problem solving guideOn indicator lamp does not light up Check q warning lamp flashes Pre-wash indicator lamp flashes Pilling is evident on the fabrics Excessive build-up of foamLime deposits are visible on the surface of the drum Grey, greasy particles cling to washed laundry Laundry washed with liquid detergent is not clean Machine shakes during the spin cycle Opening the drum door in the event of a power failureLaundry is too wet or the machine does not spin at all After sales service Installation Installation Instructions InstallationInstallation surface Removing the transport struts Installation Washer-Dryer stack Levelling the machine Grounding Instructions Grounding instructions and Electrical connectionElectrical Connection Double Receptacle Plumbing Connection to the drain sys- tem Technical data Dimensions Technical data