Xerox C20 Change tray, type size, Tray, 3 Common error messages continued, Message, Cause/Action

Common Error Messages

Table 5.3 Common error messages (continued)

Message	Cause/Action
Change tray	The printer requests a different print material than what is loaded in the tray or
type size	set in the Paper Size or Paper Type menus.
	Line 1 displays the paper source tray, which is one of the following items:
	• Tray 1
	• Tray 2
	Tray 2 only displays if the optional Tray 2 is installed.

Line 2 displays one of the following items:

•A user-defined name, for custom type 1 through 3. The name is truncated to 16 characters.

•type size: The requested type is a type other than a custom type. The type name is truncated to 16 characters. The requested size of paper or envelope displays. The size name is truncated to 16 characters.

When this message displays you can:

•Load the requested size and type in the source. The printer automatically clears the message and continues printing the job.

•Press OK to clear the message, print the portion of the job already in memory, and begin collating the rest of the job.

•See “To Cancel the Current Print Job” (page 5-24).

•See “To Reset the Printer and Cancel the Print Job” (page 5-25).

Table 5-3 Page 4 of 6

Chapter 5: Troubleshooting ❖ 5-21