Xerox NC20 manual RIGHT CART TYPE New Standard, Old Hi Capacity, Replacing the Print Cartridges

Replacing the Print Cartridges

12 The display reads:

RIGHT CART TYPE

New Standard

Do one of the following:

•If you installed a new standard yield print cartridge, press OK to choose New Standard.

•If you installed a previously used standard yield print

cartridge, press until Old Standard appears on the second line of the display. Press OK to choose Old Standard.

•If you installed a new high yield print cartridge, press

until New Hi Capacity appears on the second line of the display. Press OK to choose New Hi Capacity.

•If you installed a previously used high yield print cartridge, press until Old Hi Capacity appears on the second line of the display. Press OK to choose

Old Hi Capacity.

13 Go to the procedure “To Align the Print Cartridges”

(page 4-11).Pressing without installing any cartridges returns the printer to the ready state without changing the alignment settings.

If you install a partially used print cartridge, the low ink levels and ink percentages will not be accurate.

4-10 ❖ DocuPrint C20/NC20 User Guide