Onkyo TX-SR506 instruction manual Listening Mode Presets TX-SR576 only

Models: TX-SR576 TX-SR506

1 96
Download 96 pages 28.6 Kb
Page 66
Image 66

Adjusting the Listening Modes—Continued

Listening Mode Presets (TX-SR576 only)

On the Listening Mode Preset menu, you can specify a default listening mode for each of the audio formats sup- ported by each input selector. The AV receiver will then select the listening mode automatically depending on the format of the input signal. You can still select the other listening modes, although the default listening mode will be used the next time you turn on the AV receiver.

1

Press the [RECEIVER] REMOTE

 

 

MODE button, followed by the

 

[SETUP] button.

2

Use the Up and Down [ ]/[ ]

 

 

buttons to select “5.Listening-

 

Mode,” and then press [ENTER].

3

Use the Up and Down [ ]/[ ]

 

 

buttons to select an input selec-

 

tor, and then press [ENTER].

 

The audio formats supported by that

 

input selector appear.

 

For the TUNER input selector, Anlg

 

(Analog) is the only format available.

4

Use the Up and Down [ ]/[ ]

 

 

buttons to select an audio for-

 

mat, and use the Left and Right

 

[ ]/[ ] buttons to select a lis-

 

tening mode.

 

Only listening modes compatible with

 

the audio format can be selected (see

 

pages 56–58).

 

A/PCM: Specifies the default listening

 

mode for analog and PCM sources.

 

Dolby: Specifies the default listening

 

mode for Dolby Digital sources.

 

DTS: Specifies the default listening

 

mode for DTS sources.

 

DF2ch: Specifies the default listening

 

mode for 2-channel (2/0) stereo sources

 

in a digital format, such as Dolby Digi-

 

tal or DTS.

 

Mono: Specifies the default listening

 

mode for mono sources in a digital for-

 

mat, such as Dolby Digital or DTS.

 

MCH P: Specifies the default listening

 

mode for multichannel PCM sources,

 

such as DVD-Audio (input via HDMI).

 

192k: Specifies the default listening

 

mode for high resolution 192kHz and

 

176.4kHz digital sources, such as

 

DVD-Audio.

5

When you’ve finished, press the

 

 

[SETUP] button.

 

Setup closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

66

Page 66
Image 66
Onkyo TX-SR506 instruction manual Listening Mode Presets TX-SR576 only