Onkyo Optimize Your Audio Experience with IntelliVolume Settings

Advanced Setup—Continued

•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.

Source Setup (TX-SR576 only)

This section explains items on the Source Setup menu. Items can be set individually for each input selector.

1	Press the input selector buttons
	to select an input source, and
	then press the [RECEIVER]
	REMOTE MODE button.

5

6

Use the Left and Right []/[ ] buttons to change it.

The Source Setup menu items are explained below.

When you’ve finished, press the [SETUP] button.

Setup closes.

2

3

4

Press the [SETUP] button.

Use the Up and Down []/[ ] buttons to select “4. Source Setup,” and then press [ENTER].

Use the Up and Down []/[ ] buttons to select an item, and then press [ENTER].

IntelliVolume

With IntelliVolume, you can set the input level for each input selector individually. This is useful if one of your source components is louder or quieter than the others.

Use the Left and Right []/[ ] buttons to set the level.

If a component is noticeably louder than the others, use the Left [] button to reduce its input level. If it’s noticeably quieter, use the Right [ ] button to increase its input level. The input level can be adjusted from –12 dB to +12 dB in 1 dB steps.

Note:

• IntelliVolume does not apply for Zone 2.

A/V Sync

When using your DVD player’s progressive scanning function, you may find that the picture and sound are out of sync. With the A/V Sync setting, you can correct this by applying a delay to the audio signal. The delay can be set from 0 to 100 milliseconds (msec) in 20 millisecond steps.

Use the Up and Down []/[ ] buttons to select an input selector, and use the Left and Right [ ]/[ ] but- tons to set the delay.

To view the TV picture while setting the delay, press [ENTER].

If HDMI Lip Sync is enabled (see page 75), and your TV or display supports HDMI Lip Sync, the displayed delay time will be the A/V Sync delay time. The HDMI Lip Sync delay time is displayed underneath in parentheses.

Note:

•A/V Sync is disabled when the Pure Audio listening mode is selected, or when the Direct listening mode is used with an analog input source.

72