Advanced
Equalizer Settings
These settings are set automatically by the Automatic Speaker Setup function (see page 36).
Here you can adjust the tone of individual speakers. To set the volume of individual speakers, see page 70.
1 | Press the [RECEIVER] REMOTE |
| |
| MODE button, followed by the |
| [SETUP] button. |
| If you have a |
| step 3. |
2 | |
| |
| Use the Up and Down [ ]/[ ] |
| buttons to select “2.Speaker |
| Setup,” and then press the |
| [ENTER] button. |
3 Use the Up and Down []/[ ] buttons to select “Equalizer (Eq Settings),” and then press [ENTER].
4 | Use the Left and Right [ ]/[ ] |
| buttons to select: |
Off: Tone off, response flat. Audyssey: The tone for each speaker
is set automatically by the Automatic Speaker Setup function. Be sure to select this setting after having performed the Automatic Speaker Setup.
Manual: You can adjust the equal- izer for each speaker manually.
If you selected Manual, continue with this procedure. If you selected Off or Audyssey, go to step 8.
5 | Press the Down [ ] button, and |
| then use the Left and Right |
[]/[ ] buttons to select a speaker.
6 | Use the Up and Down [ | ]/[ | ] | |
| buttons to select a frequency. | |||
| Use the Left and Right [ | ]/[ | ] | |
| buttons to adjust the level at that | |||
| frequency. |
|
|
|
| The volume at each frequency can be | |||
| adjusted from |
| ||
| steps. |
|
|
|
| Tip: Low frequencies (e.g., 63Hz, |
| ||
| 80Hz) affect bass sounds; high frequen- | |||
| cies (e.g., 8000Hz, 16000Hz) affect tre- | |||
| ble sounds. |
|
|
|
7 | Use the Up [ | ] button to select | ||
| “Ch,” and then use the Left and | |||
| Right [ ]/[ | ] buttons to select | ||
| another speaker. |
|
|
Repeat steps 5 and 6 for each speaker. Speakers that you’ve set to No or None in the Speaker Configuration (page 67) cannot be selected.
8 | Press the [SETUP] button. |
| |
| The setup menu closes. |
Notes:
•
•
•While the Direct or Pure Audio listening mode is selected, the equalizer settings have no effect.
71