First Time
4 | Press the [SETUP] button. |
| |
| Setup closes. |
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
For
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 Use the Up and Down []/[ ] buttons to select “1.Input Assign,” and then press [ENTER].
3 | Use the Up and Down [ ]/[ ] |
| buttons to select |
then press [ENTER].
4 Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:
HDMI1: Select if the video compo- nent is connected to HDMI IN 1.
HDMI2: Select if the video compo- nent is connected to HDMI IN 2.
HDMI3: Select if the video compo- nent is connected to HDMI IN 3.
- - - -
HDMI OUT.
5 | Press the [SETUP] button. |
| |
| Setup closes. |
Notes:
•Each HDMI IN cannot be assigned to more than one input selector.
•When an HDMI IN is assigned to an input selector as explained here, the digital audio input for that input selector is automatically set to the same HDMI IN. See “Digital Input Setup” on page 42.
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
40