First Time
Component Video Input Setup
If you connect a video component to a COMPONENT VIDEO IN, you must assign that input to an input selector. For example, if you connect your DVD player to COMPONENT VIDEO IN 2, you must assign COM- PONENT VIDEO IN 2 to the DVD input selector.
By default, the DVD input selector is assigned to COM- PONENT VIDEO IN 1, and all of the other input selec- tors (i.e., VCR/DVR, CBL/SAT, AUX) are assigned to the “- -
For
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
For
1 | Press the [RECEIVER] button, |
| |
| followed by the [SETUP] button. |
2 | Use the Up and Down [ ]/[ ] |
| buttons to select “1.Input |
Assign,” and then press [ENTER].
2 | Use the Up and Down [ ]/[ ] | 3 | Use the Up and Down [ ]/[ ] | |
buttons to select | ||||
| buttons to select “2.Component,” |
| ||
|
|
|
and then press [ENTER]. | nent,” and then press [ENTER]. |
|
3
4
Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:
IN1: Select if the video component is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component is connected to COMPO-
NENT VIDEO IN 2.
No: Select if you’re not using the
COMPONENT VIDEO OUT.
Press the [SETUP] button.
Setup closes.
4
5
Use the Up and Down []/[ ] buttons to select an input selec- tor, and use the Left and Right []/[ ] buttons to select:
IN1: Select if the video compo- nent is connected to COM-
PONENT VIDEO IN 1. IN2: Select if the video compo-
nent is connected to COM-
PONENT VIDEO IN 2.
-- - -
COMPONENT VIDEO OUT.
Press the [SETUP] button.
Setup closes.
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
Note:
•This procedure can also be performed on the AV receiver by using its [SETUP], [ENTER], and arrow buttons.
41