ENGLISH | REAR PANEL | |
SA7001 | ||
|
AC IN
ANALOG OUTPUT | DIGITAL AUDIO OUT | REMOTE CONTROL | |
L | R | OPT. COAX. | IN |
|
|
| |
|
|
| EXT. |
|
|
| INT. |
|
|
| OUT |
N
A B C D EF
SA7001 KI
ANALOG OUTPUT
L
R
AC IN
DIGITAL AUDIO OUT | REMOTE CONTROL |
OPT. COAX.
IN
EXT.
INT.
OUT 
A B C D EF
AANALOG OUTPUT connectors
These are the output jacks of the analog audio signals. The supplied analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks.
*Never connect to the PHONO connector on the amplifier.
BDIGITAL AUDIO OUT OPT.
It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has optical digital input using an optional square type optical digital cable.
*No signal will be output when a Super Audio CD is played.
CDIGITAL AUDIO OUT COAX.
It outputs the playing Audio CD signal in digital format. This jack is to be connected with a recording device, amplifier, D/A converter, etc that has coaxial digital input using an optional coaxial digital cable.
*No signal will be output when a Super Audio CD is played.
DREMOTE CONTROL IN, OUT (input and output) connectors
When the remote control connectors on the player and on a Marantz AV component are connected using the accessory remote control connecting cables, the components can be operated as a system by remote control.
•When connecting to a component which is equipped with remote control connectors, the player’s REMOTE CONTROL IN connector must always be connected to the REMOTE CONTROL OUT connector on the other component to be connected.
•When connecting a component which is not equipped with an infrared remote sensor, this component must always be connected to the player’s REMOTE CONTROL OUT connector.
EEXT./INT. (Ext./Internal switch)
When this unit is used as a standalone component, set this switch to the INT. side. When it is used connected to external component by a remote connecting cable and to audio component with a remote sensor that supports remote controls by Marantz, set this switch to the EXT. side.
*If the unit is used as standalone and the switch is set to EXT. position, remote control unit cannot be used.
FAC POWER INPUT JACK
Connect the supplied power cord to this jack and a household AC power outlet.
6
