Operation
Hazards Radio Icon
Alert Icon
Mode Button
Hazards Radio Icon
Channel Button
Mode Button
Alert Icon
Channel Button
10 English
Using Your Radio
NOAA* All Hazards
Radio Channels and Alert
•
You can use your microTALK® radio to listen to NOAA All Hazards Radio channels transmitting in your area.
You can also program your microTALK® radio to sound a tone alert when a local NOAA channel activates an Emergency All Hazards Alert. This will warn you of weather, chemical, and other civilian emergencies.
To Listen to All Hazards Radio channels:
1.Press the Mode button until the Weather (All Hazards Radio) icon, the currently selected All Hazards Radio channel, and signal strength are displayed.
2.Use the Channel Up or Channel Down
button to change All Hazards Radio channels.
3.Weather (All Hazards Radio) icon will continue to be displayed when All Hazards Radio is On.
a.Press the Mode button to proceed to other functions.
b.Press the Lock button to exit All Hazards Radio channel mode and return to Standby Mode.
To Turn On All Hazards Alert:
1.Press the Mode button until the Alert icon flashes and the current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to turn All Hazards Alert On or Off.
3.Alert icon will continue to be displayed when All Hazards Alert is On.
a.Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button or do not press any buttons for 15 seconds to enter the new setting and return to Standby Mode.
c.Press the Talk button to enter the new settings and return to Standby Mode.
*National Oceanographic and Atmospheric Administration
Introduction
Mode Button
Stopwatch Icon
Channel Up
Mode Button
Stopwatch Icon
Channel Down
|
|
|
Operation | Customer Assistance | Warranty |
Stopwatch
•
You can use the time keeping feature of your microTALK® radio as a stopwatch, including the display of split times. After starting the timer, you can view an interim “split” time while the first timer continues to run.
To Activate Stopwatch Mode:
1.Press the Mode button until the Stopwatch icon and “OO:oo:oo” is displayed in the LCD.
2.Press the Channel Up button to start the stopwatch.
3.Press the Channel Up button again to stop the stopwatch.
To restart and stop the stopwatch, repeat step 2 and 3.
4.Press the Mode button to exit Stopwatch Mode and proceed to other functions.
To Activate Split-Time in Stopwatch Mode:
1.Press the Mode button until the Stopwatch icon and “OO:oo:oo” is displayed in the LCD.
2.After starting the stopwatch (see above), press the Channel Down button to start the
3.Press the Channel Down button to return to the stopwatch. (To stop the stopwatch, see above.)
To restart and stop the Split-Timer, repeat step 2 and 3.
4.Press the Mode button to exit Stopwatch Mode and proceed to other functions.
Nothing comes close to a Cobra™ 11
