|
| Using Your Radio |
|
| |
| Operation |
|
|
|
|
|
|
| “Roger Beep” Confirmation Tone | • |
|
|
|
| Your listener will hear an audible tone when you |
| |
|
|
|
|
| |
|
|
| release the Talk button. This alerts the other party | ||
|
|
| that you are finished talking and it is OK for them | ||
|
|
| to speak. This feature can be turned On or Off. |
|
|
| Mode Button |
| To Turn “Roger Beep” On or Off: |
|
|
|
|
|
|
|
|
|
|
|
| Introduction | Operation | Customer Assistance | Warranty |
|
|
| |
|
|
|
|
|
|
| ||
| Compass Icon |
| • |
|
| |||
|
|
|
|
|
|
|
| |
Your microTALK® radio features an 8-point digital compass.
Because the surrounding terrain can affect compass accuracy, it is recommended that you calibrate
Roger Beep On
When turning On your microTALK® radio for the first time, “Roger Beep” will be On.
1. Press the Mode button until the Roger |
Beep icon flashes on the LCD. The current |
On or Off setting is displayed. |
the compass before each use. It is important to keep the radio parallel to the ground at all times while calibrating and using the compass.
Channel Button
2. Press the Channel Up or Channel Down |
button to select “Roger Beep” On or Off. |
3. a. Press the Mode button to enter the new |
setting and proceed to other functions. |
b. Press the Lock button to enter the new |
setting and return to Standby Mode. |
The setting you select will be saved when you turn your radio Off and On again. When the “Roger Beep” is On, the “Roger Beep” icon will be displayed.
Compass Button
CALIbr Compass
Parallel To Ground
To Calibrate the Compass:
1. | Press and hold the Compass button for two |
| (2) seconds. The Compass icon and “CALIbr” |
| will appear in the display. |
2. | Hold the radio in front of you, parallel to the |
| ground, and turn around in a circle at least |
| two (2) times (or you may place the radio |
| on the palm of one of your hands, parallel |
| to the ground, and turn it in a circle at least |
| two (2) times with your other hand). |
3. | Press the Compass button again. |
Mode Button |
| Keystroke Tones | • |
|
| With Keystroke Tones turned On, your radio | |
|
|
| |
|
| will sound beeps each time you press a button |
|
|
| or change a setting. |
|
Success
4. a. If compass calibration was successful, |
“SUCCES” will appear in the display for |
one (1) second, then the radio will |
automatically return to Compass Mode. |
Keystroke Tones On
Channel Button
To Change Keystroke Tones:
1.Press the Mode button until the Keystroke Tones icon flashes on the LCD. The current On or Off setting is displayed.
2.Press the Channel Up or Channel Down button to turn Keystroke Tones On or Off.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby Mode.
Fail
b. If “FAIL” appears in the LCD, repeat steps 1 through 3. (If you receive repeated “FAIL” messages, change locations and repeat steps 1 through 3.)
20 English
Nothing comes close to a Cobra® 21
