Operation
Mode Button
Scanning Memory
Channel Button
18 English
Using Your Radio
To Scan Memory Locations:
1.Press the Mode button until the Scan icon, Memory icon, and the memory location number flashes on the display.
2.Press the Channel Up or Channel Down button and your radio will begin scanning memory locations.
3.The Scan icon will continue to be displayed when scan is on. Your radio will continue to scan memory locations and stop if an incoming transmission is detected. Your radio will remain on that memory location for ten
(10) seconds. During this time, you can:
a. Press and hold the Talk button to communicate with others. Your radio will remain on that memory location and return to Standby Mode.
b. Press the Channel Up or Channel Down button to resume scanning memory locations.
c. Press the Mode button to proceed to next available Mode function.
If you press the Talk button while scanning and not within ten (10) seconds of receiving transmission, you will transmit on the last channel you transmitted or received on.
If you do not press any button within ten (10) seconds, your radio will automatically resume scanning memory locations.
If you want to reduce the number of memory locations being scanned, you need to
See page 15 for more details.
You must have at least two (2) memory locations programmed in order to scan memory locations.
Introduction
Mode Button
VibrAlert® + Ring
VibrAlert® Only
Ring Only
Channel Button
Mode Button
Call Tone Setting
Channel Button
|
|
|
Operation | Customer Assistance | Warranty |
VibrAlert® and Call Tones
•
Your microTALK® radio can alert you to incoming signals by sounding an audible call tone, by vibrating silently, or both.
To Change Call Settings:
1.Press the Mode button until the Call Setting icon flashes on the LCD. The current setting (Vibrate + Ring, Vibrate Only, or Ring Only) is displayed.
2.Press the Channel Up or Channel Down button to change the call setting.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b.Press the Lock button to enter the new setting and return to Standby Mode.
10 Call Tone Settings
•
You can choose between ten (10) different call tone settings to transmit a unique call alert.
To Change a Call Tone Setting:
1.Press the Mode button until the letter “C” and the current call tone number (1 through
10)is displayed. The current call tone will sound for one (1) second.
2.Press the Channel Up or Channel Down button to hear the other call tone settings.
3.a. Press the Mode button to enter the new setting and proceed to other functions.
b. Press the Lock button to enter the new setting and return to Standby Mode.
Nothing comes close to a Cobra® 19
