Mode Functions
Operation
Scrolling through Mode Functions
•
By scrolling through the Mode Functions, you will be able to select or turn on/off preferred features of your microTALK® radio. When scrolling through the Mode Functions, your radio features will be displayed in the following order:
Lock/Mode Button |
|
| Set CTCSS Privacy Codes |
|
|
| Set VOX On/Off |
|
|
| Set VOX Sensitivity Level |
|
|
| Set Memory Locations |
|
|
|
|
Introduction | Operation | Customer Assistance | Warranty |
CTCSS Privacy Codes
•
CTCSS (Continuous Tone Coded Squelch System) is an advanced tone coding system allowing you to select one of 38 privacy codes to reduce interference from other users on the channel.
If you are using a privacy code, both radios must be tuned to the same channel and privacy code to communicate. Each channel will remember the last privacy code you selected.
Set Channel Scan |
Set CTCSS Privacy Code Scan |
Set Memory Location Scan |
Set Call Alert Tone Signal |
Set Roger Beep On/Off |
Set Keystroke Tones On/Off |
Scroll through the mode functions using the Lock/Mode button. Each press and release of the Lock/Mode button will advance to the next mode function. Press the Talk button at any point to return the radio to Standby mode.
Lock/Mode Button
CTCSS Privacy Code
Channel Buttons
To select a privacy code:
1.After selecting a channel, press
the Lock/Mode button until the small numbers next to the channel number flash on the display.
2.Press using the Channel Up or Channel Down button to select a privacy code. You can hold the Up or Down button for fast advance.
3.When your desired privacy code is displayed, choose one of the following:
a.Press the Lock/Mode button to enter the new setting and proceed to other functions.
b.Press the Hi•Low/Enter button to enter the new setting and return to Standby mode.
c.Do not press any buttons for 15 seconds to enter the new setting and return to Standby mode.
|
|
|
|
10 English | Nothing Comes Close to a Cobra® 11 | ||
