9493 XRS
Installation
Your Detector
Dashboard Mounting
1.Place the detector on the dashboard to find a location where the unit has a clear, level view of the road.
The angle can NOT be adjusted after mounting.
2.Remove the paper backing
from one side of the hook-
3. Attach the pad to the dashboard at your chosen location and remove the other paper backing.
Getting Started and Settings
Your Detector
Getting Started
•
Volume Control
Power On | Rotate clockwise |
X K Ka V S h | (away from you) |
|
To Turn On the Unit and Adjust the Audio Volume
4. Attach the detector to the |
Rotate the | Tone | |
Volume control | Three beeps | |
clockwise (away | ||
| ||
from you). |
| |
|
|
Voice | Visual Display | |
Testing, then | h appears in the | |
three beeps | display indicating | |
System Ready, then | that the power | |
is on | ||
Voice Alert | ||
| ||
|
|
You can remove and |
reattach the unit as |
often as you like. |
5. Plug the power cord |
into the detector. |
6. Plug the cigarette lighter adapter on the power cord into your vehicle’s cigarette lighter.
4 English
NOTE
In some vehicles, power is supplied to the cigarette lighter even while the ignition is off. If this is the case with your vehicle, you should turn off or unplug your detector when parking for lengthy periods.
Settings
•
When changing the Settings on your detector, please keep in mind:
■Buttons can have multiple functions.
■Depending on your choice of Voice Alert or Tone Alert mode, you will hear either voice messages or tones confirming changes in settings.
■All settings will be stored in memory when the power is turned off and recalled when the power is turned back on.
Nothing Comes Close to a Cobra® 5
