Installation
YourDetector
NothingComes Close to a Cobra®5
Installation
YourDetector
4English
1.Attach the rubber
cupsto the bracket.
2.Make sure the rubber cups and your windshield are clean.
3.Push the bracket firmly
ontothe windshield.
4.Attach the detector to
thebracket. Check that
theunit is parallel to
theroad's surface.
5.To adjust the angle if
necessary,gently push or
pullon the bracket to bend
it.DO NOT use the detector
tobend the bracket.
6.Plug the power cord
intothe detector.
7.Plug the cigarette lighter
adapteron the power
cordinto your vehicle’s
cigarettelighter.
8.You can temporarily remove the detector whenever you
wishby depressing the bracket release button and sliding
itoff the bracket.
WindshieldMounting
1.Place the detector on the dashboard to find a location
wherethe unit has a clear view of the road and is parallel
tothe road's surface. The angle CANNOT be adjusted
aftermounting.
2. Removethe paper backing
fromone side of the hook-
and-loopfastener.
3. Attachthe pad to the
dashboardat your chosen
locationand remove the
otherpaper backing.
4.Attach the detector to the
hook-and-loopfastener.
Youcan remove and
reattachthe unit as
oftenas you like.
5.Plug the power cord
intothe detector.
6.Plug the cigarette lighter
adapteron the power
cordinto your vehicle’s
cigarettelighter.
DashboardMounting