Cobra Electronics XRS 9940 operating instructions Program Flow Diagrams, User Settings Programming

Program Flow Diagrams

Your Detector

User Settings Programming

•

User Programming allows you to adjust the unit’s display and sounds to your preferences. The User Settings can be selected using the Dim￿and City￿buttons by scrolling through the settings as shown in the program flow diagram below. The User Programming Menu Guide on page 34 is a handy reference showing the tone, visual display and voice prompts that accompany each setting. After selecting a setting, use the Mute￿button to choose an option within the setting.

NOTE

When you choose User Settings (page 11, step 2a), the system displays whichever setting was last changed.

Program Flow Diagrams

Your Detector

Alert Settings Programming

•

Alert Programming allows you to selectively turn on or off detection of some signals. The Alert Settings can be selected using the Dim￿and City￿buttons by scrolling through the settings as shown in the program flow diagram below. The Alert Programming Menu Guide on page 36 is a handy reference showing the tone, visual display and voice prompts that accompany each setting. After selecting a setting, use the Mute￿button to choose an option within the setting.

NOTE

When you choose Alert Settings (page 11, Step 2b), the system displays whichever setting was last changed.

Setting Selection Buttons:

Dim ￿Button

Press to move to desired setting..

Restore Factory

Settings

Warn Low

Car Voltage

Car Voltage

Color Theme

Display

(Brightness)

	City￿Button
	Press to move to
	desired setting.
	Mute￿Button
	Press to choose an
	option within the setting.
City Mode	IntelliMute
(Default)
	Auto Mute
Not shown	Set
if Intellimute
	IntelliMute
is OFF.
	Alert Type
	(Voice/Tone)
Not shown if	Set
Show Compass	Compass
is OFF.
	Show
	Compass
Display Timeout	SmartPower

K Band

Detection

X Band		Ku Band
Detection
		Detection
		VG-2
		Audio
		Not shown
		setting if VG 2
		is OFF.
Pop Detection	Spectre 1	VG-2
	Audio	Detection
	Not shown
	if Spectre 1
	is OFF.
	Safety Alert	Spectre 1
		Detection

This detector allows you to customize its operation by changing settings in the User Programming and the Alert Programming modes. (See page 11 for entering the EasySet Programming mode.) Also, refer to the Appendix (pages 34–36) while programming. These show the lists of User and Alert settings.

Features of the programmable settings are described on the following pages.

12 English

Nothing Comes Close to a Cobra® 13