Alarm Mode
English
To set the alarm
The clock on your speaker system includes a dual alarm, which can be set to two different wake times. The alarm can be set at any time, even during audio playback. To set the alarm:
1.Press and hold the SET pad until the hour display and ‘A1’ begin to flash.
A1 denotes Alarm 1.
2.Select the alarm hour using the [ + ]/[ – ] controls. Press the SET pad to confirm selection. The minute display will begin to flash.
3.Select the alarm minute using the [ + ]/[ – ] controls. Press the SET pad to confirm selection. The alarm volume setting will begin to flash.
4.Select the alarm volume using the [ + ]/[ – ] controls. Press the SET pad to confirm selection.
5.The hour digits and ‘A2’ (denoting Alarm 2) will begin to flash. Repeat steps
To set the alarm type
You can select the alarm to wake you with a standard ‘BEEP’, AM/FM radio, or playback from your iPod. To choose an alarm type, at least one alarm must be set and activated. (Screen will display A1/A2.) The system speaker/ radio must be turned off.
Page 10 | Coby Electronics Corporation |
|
|
