![](/images/new-backgrounds/1327528/32752821x1.webp)
Alarm Mode
To set the alarm type:
1.Press and hold the MODE pad until the display flashes the current alarm type (iPod, FM, AM or BEEP).
2.Press the MODE pad until you have reached the desired alarm type. Wait for the display indicator to stop flashing, indicating that the alarm type is set.
English
You may also select the alarm type by pressing the ALARM MODE button on your remote control.
Once you have set an alarm, the Alarm Signal Format indicator will illuminate along with the audio mode when the speaker system is in use. (E.g. When alarm is set to RADIO type and system is playing iPod audio, both the iPod and RADIO logos will display on screen.)
To activate the alarm
Once your alarms are set, they can be activated in any combination (ALARM 1 only, ALARM 2 only, or ALARM 1 &
2). To activate the alarms:
Press the SET pad on the system, or the ALARM key on the remote control. The screen will display the ALARM 1 time for three seconds. The ‘A1’ symbol will continue to display, indicating that ALARM 1 has been selected.
To select ALARM 2 or ALARM 1 & 2, press the SET pad until the display indicates that the desired alarm is selected.
www.cobyusa.com | Page 11 |
|
|