Thank you for selecting the COBY CV-890 Wireless Stereo Headphone System.
Before operating the unit, please read this manual thoroughly and retain it for future reference, some features are:
Wireless system that allows you to listen to a program free from the restriction of a cord.
High fidelity sound reproduction.
A compact transmitter with an AC power adaptor (supplied) enables simple charging of the headphone batteries. Just by placing the headphones on the transmitter, headphone batteries can be charged.
Comfortable Circum - aural headphones with self adjusting head band.
As power saving feature, the transmitter automatically turns ON when the audio signal is detected and OFF when the signal is not received.
Notes on Receiving Performance
The system for this equipment utilizes very high frequency signals in the 2.4GHz band so the receiving performance may deteriorate due to the surroundings. Some examples of conditions that may reduce the possible receiving range or cause interference with reception.
Warning
To prevent fire or shock hazard, do not expose the unit to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment.
If you have any questions about this product, you may call:
COBY Customer Service Department
Monday-Friday 8:00 AM - 11:00 PM EST, 1-800-681-2629 or 718-
416-3197
Monday-Friday 6:30 PM - 11:00 PM EST, 1-800-727-3592Saturday-Sunday 9:00 AM - 11:00 PM EST, 1-800-727-3592
You can also reach us online at techsupport@cobyusa.com or customerservice@cobyusa.com
FCC Rules
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
Battery Caution
To reduce the risk of fire or injury to persons, read and follow these instructions:
For the wireless headphone, use only 3AAA 1.2V 600mAh Nickel Metal Hydride(Ni-MH) batteries (included). Do not dispose of the batteries in a fire. The cells may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the batteries. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
Do not attempt to rejuvenate the batteries identified for use with this product by heating them. Sudden release of the battery electrolyte may occur causing burns or irritation to eyes or skin.
When inserting batteries into this product, the proper polarity or direction must be observed. Reverse insertion of batteries can cause charging, and that may result in leakage or explosion.
Remove the batteries from this product if the product will not be used for a long period of time(several months or
COBY Customer Service Department
Inside a building with walls containing steel beams. Area with many steel file cabinets, etc.
Area with many electrical appliances capable of generating electromagnetic noise.
Transmitter is placed on a metal instrument. Area facing roadways.
Noise or interfering signals exist in the surroundings due to radio transceivers in trucks, etc.
Noise or interfering signals exist in the surroundings due to wireless communication systems installed along
roadways.
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
more)since during this time the battery could leak in the product.
Do not store this product ,or the batteries identified for use with this product, in high temperature areas. Batteries that are stored in a freezer or refrigerator for the purpose of extending shelf life should be protected from condensation during storage and defrosting.
Monday-Friday 8:00 AM - 11:00 PM EST, 1-800-681-2629 or 718-416-3197
Monday-Friday 6:30 PM - 11:00 PM EST, 1-800-727-3592 Saturday-Sunday 9:00 AM - 11:00 PM EST, 1-800-727-3592
Unpacking | Description |
Check that you have the following items when you |
open the packaging : | |
| The headband |
| Headset leg |
| Battery cover |
| Headset cup |
| Volume UP key |
| Volume DOWN key |
HEADPHONE | TRANSMITTER |
Charge contents
| Extra battery |
BATTERIES | compartment |
AUDIO LINE |
| Audio IN jack |
| DC IN jack |
| Charge LED |
| In Use LED |
AUDIO CONVERSION LINE | Channel select button |
AC ADAPTER |
| Power ON/OFF button |
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Install the batteries
The supplied rechargeable Ni-MH batteries are not charged from the first time you use them. Be sure to charge them before use. To charge, the headphones, place them on the transmitter.
Turn the battery cover according to the direction of the arrowhead silk and open it.
Insert the supplied rechargeable Ni-MH batteries into the battery compartment matching the correct terminals between the batteries and the compartment.
Close the battery compartment cover according to the opposite direction of the arrowhead silk .
Connect the supplied AC power adaptor to the transmitter.
To anAC outlet
AC power adapter
P u t t h e h e a d p h o n e o n t h e t r a n s m i t t e r s o t h a t t h e headphone's contact meets the t r a n s m i t t e r ' s c o n t a c t p i n while making sure that the charging indicator lights in red. Charging is completed in about 16 hours and the charging indicator goes off.
When placing the headphones on the transmitter, be sure to hold them level with both hands and that the right and left housings are placed straight down on the
transmitter, and then tilt | them |
back as illustrated above. | The charging hole, and the |
headphone's contact is in it |
When the indicator does not light in red
Check if the right and left headphones are rested on the transmitter correctly. The indicator will not light up If the headphone's contact does not meet the transmitter's contact pin. Remove the headphones and replace them on the transmitter again so that the indicator lights in red.
Notes on Batteries
Do not charge the dry battery.
Do not carry a dry battery together with coins or other metallic objects. It can generate heat if the positive and negative terminals of the battery accidentally come into contact with metallic objects.
If you are not going to use the unit for a longtime, remove the battery to avoid damage from battery leakage or corrosion.