COBY electronic DVD233 Standard Television Connection at a Glance, To TV Component Video Input

GETTING STARTED

Standard Television Connection at a Glance

Yellow

White Y

Red

Connect the player’s Composite Video Output to the TV’s Composite Video Input (yellow).

Connect the player’s 2-Channel L&R Audio Outputs to the TV’s L&R Audio Inputs (red/white).

To TV Composite Video Input

Progressive Scan Video (480p) Connection

	Green
Blue	Red	Connect the player’s Component Video Output to the TV’s
		Component Video Input (red/green/blue).
		Connect the player’s 2-Channel L&R Audio Outputs to the
		TV’s L&R Audio Inputs (red/white).

White	Y
Red

To TV Component Video Input

The player is equipped with composite AV outputs at the rear panel (yellow/red/white). Your TV will require at least one set of AV inputs. The supplied AV patch cord will connect your player’s AV output to your TV’s inputs.

The player is equipped with 2-channel stereo or 5.1- channel surround sound outputs on the rear panel. For stereo or surround sound, a Stereo TV or Surround AV receiver is necessary. For Mono TVs, you can connect either the Left or Right stereo audio output to the Mono TV’s audio input.

Depending on the brand of your TV, you may need to press a button labeled “Line”, “Input”, or “Video/TV” in order to set your TV to the correct input line. This will switch the TV from broadcast reception mode to on of the AV input signals. (Some TVs may have more than on AV input line.

www.cobyusa.com Page 15