COBY electronic DVD233 instruction manual Setup, Language Settings, Display Settings

SETUP

Enter Setup mode to adjust the various internal settings of the player. Make sure the player has been completely stopped before entering Setup mode.

1. Press SETUP to enter Setup mode.

2. Use the NAVIGATION keys to select a desired item.

3. Press ENTER to confirm a selection.

4.Press SETUP to exit Setup mode (or select EXIT and press ENTER).

Language Settings

Use the NAVIGATION keys to highlight the desired language selection and press ENTER to confirm.

Item	Description	Default Setting
OSD	Sets the language of the player’s on-screen	English
	display.
Menu	Sets the default menu language of loaded DVDs.	English
Audio	Sets the default language audio track of loaded	English
	DVDs.
Subtitle	Sets the default subtitle track of loaded DVDs.	English
Screen Saver	The screensaver prevents burn-in damage to the	On
	player’s screen.
Defaults Reset	Resets all settings to their factory-default state.

Display Settings

Use the NAVIGATION keys to highlight the desired display selection and press ENTER to confirm.

Item	Description	Default Setting
	Sets the aspect ratio of the display. 4:3 is used
Aspect Ratio	with standard television displays; 16:9 is used	4:3L-Box (Letterbox)
	with widescreen television displays.
	Sets the player’s Video Out signal type. Set this
TV Type	to correspond with your TV’s Video System type.	NTSC
	NTSC is the standard used in North America.
	Sets your player’s video output mode. Set this to
	correspond with the type of connection used with
Video Out	your TV.	S-Video+CVBS
	S-Video+CVBS: S-Video or Composite Video
	P-Scan: Component Video (Progressive Scan)
	YUV: Component Video

Page 24 Coby Electronics Corporation