COBY electronic TF-TV705 Tv Function, Basic Operation, TV Setup Menu Menu Navigation, Description

TV FUNCTION

Basic Operation

1.Prepare the antenna (optional) and power connections (see the Getting Started section for details)

2.To turn the TV on, set the Power Switch to the “On” position.

3.To set the unit to TV mode, press AV/TV. You should see the antenna signal on screen.

4.To change the channel, press CH+/CH-.

5.To change the channel directly, press INPUT on the remote, then use the numeric keypad to enter a channel number.

6.To view the current channel number on screen, press CALL. To return to a previously viewed channel, press RECALL.

7.To adjust the volume level, press VOL+/VOL-.

TV Setup Menu

Menu Navigation

To navigate the TV menu:

• Press MENU. The Setup menu will appear on screen.

• To select an option, press CH+/CH-.

• To adjust a selected option, press VOL+/VOL-.

•To exit the Setup menu, press MENU.

Menu Options

The TV setup menu contains the following options: ANTENNA, AUTO, FINE, SKIP, BRIGHT-

NESS, CONTRAST, COLOR, RESET.

Item	Description
Antenna	Set the Antenna system type: HRC, IRC, Air, Cable.
Auto	Select to search and store all available broadcast channels.
Fine	Adjust to fine-tune reception of a channel
Skip	Set to “On” skip an unwanted channel; set to “Off” to keep the channel
Brightness	Adjust the brightness level of the display screen.
Contrast	Adjust the contrast level of the display screen.
Color	Adjust the color level of the display screen.
Reset	Restore all options to their factory-default settings

Page 14 Coby Electronics Corporation