Code Alarm manual Model CATX630, Changing the Remote Control Battery

Model CATX630

Programming Guide

Changing the Remote Control Battery

The 12-volt alkaline battery supplied in your remote transmitter should last approximately one year, depending on usage. When the battery begins to weaken, you will notice a decrease in range, or the distance from your vehicle that your remote transmitter will operate. Follow the instructions below to change the remote transmitter battery.

1.Insert the edge of a coin into the slot at the side of the remote control. Twist the coin to pry the remote control halves apart.

2.Remove the old battery and replace with a new one. Be sure to observe the (+) and (-) signs in the battery compartment.

3.Carefully snap the case halves back together, then test the remote control.

For Customer Service and Product information Call

1-800-421-3209