When You Are Ready To Set Up Your Tent

Select a level campsite clear of rocks, branches and other hard or sharp objects.

Do not set up your tent under trees.

For best results in windy conditions, position the end of tent into the wind.

SCREENED WEATHERMASTER® 17'X9'

Instructions apply to Part Number 2000000147

POLE ASSEMBLY PARTS

(3) Center Curved Roof Poles

(Red Sticker) Part No. 5010000474

(1)Rear Pole (Blue Sticker) Part No. 5010000475

(2) Rear Brace Poles

(Blue Sticker) Part No. 5010000476

(6) Center Upright Poles

(Red Sticker) Part No. 5010000477

Rainfly Part No. 5010000481

1

Layout & Positioning of Tent

– Layout and position tent with screen room

 

facing desired direction. (illus.

1)

 

– Stake down tent, starting with

Roof sleeve

the corners. Do not stretch too tight. Angle the stakes slightly toward the tent.

(illus. 2) Keep the floor taut.

– Stake down the remainder of the stake loops.

– Unzip the door.

illus. 1

illus. 2

Stake loops properly staked

Front of screen door

2 Assemble & Place Roof Poles

– Assemble all shock-corded roof poles. When assembled will form a continuous arch with both ends pointing down. (illus. 3)

– Select center roof poles with red stickers, then insert through the two center roof sleeves and the roof pole sleeve at the front of the screen room. (illus. 4)

– Select end roof pole, with blue sticker, then insert through the roof sleeve at end of the tent. (illus. 4)

Forms an arch

Shock-corded poles

illus. 3 Curved roof pole assembly.

Roof pole sleeve

illus. 4 Curved roof pole system shown

inserted through pole sleeve.

Page 1
Image 1
Coleman 17'X9 manual Layout & Positioning of Tent, Screened Weathermaster, Assemble & Place Roof Poles