Coleman 2000001586 manual Before you begin, Pole Descriptions, To Set Up Tent, To Attach Rainfly

EVANSTONTM 4 MODEL 2000001586

Before you begin

Read all instructions before set up.

•Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

•Do not set up your tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.

•Secure with all stakes and guylines provided to prevent property damage or personal injury.

•For best results in windy conditions, position narrow end of tent into the wind.

•Enlist the help of at least one other person to assist you when it is time to assemble the tent.

Pole Descriptions

		Pole	Pole	Pole
Description	Qty.	Dia.	Repair Kit	Replacement Kit
Main Pole, black	2	9.5mm	5010000540	5010000548
Main Pole, grey	1	9.5mm	5010000540	5010000548
Rainfly Pole, black	1	9.5mm	5010000540	5010000548
Awning Pole, black, short	1	6.3mm	5010000543	5010000545

STITCH LINE

To Set Up Tent Sleeves with Black Trim Fig. 1

1.	Unfold tent and spread out on a clean, level surface with	Sleeve with
	the door facing the desired direction. (Fig. 1)
		Grey Trim
2.	Assemble all poles by interlocking the shock-corded,	Grey, Shock-corded
	sections together.	Main Pole
3.	Insert black Main Poles through the black trimmed
	sleeves on top of tent forming an X”.	Door
4.	Insert grey Main Pole through grey trimmed sleeve, in	Front of Tent
	front of tent. Make sure grey Main Poles overlap the
		Black, Shock-corded Main Poles
	black Main Poles. (Fig. 1)

5.Insert end of each black Main Pole into pins located in the corners of the tent. (Fig. 2 & 2A)

6. Go to opposite end of each black Main Pole and gradually	2C
apply pressure to each forming arches. Insert the pin into
each pole end at the corners of tent. (Fig. 2 & 2A)

7.Insert end of the grey Main Pole into pin located on the sides of the tent. (Fig. 2 & 2B)

8.	Go to opposite end of the grey Main Pole and	2B				2A
				Door
	gradually apply pressure to form an arch. Insert
	the pin into pole end at the side of tent. (Fig. 2 & 2B)
9.	Attach frame clips along edges of tent to the black	2D
	& grey Main Poles. (Fig. 2C)
10.	Stretch tent until taut, then secure metal loops		Front of Tent
	located on both sides and four corners of tent
					Fig. 2
	with stakes. (Fig. 2D)

To Attach Rainfly

1.	Drape Rainfly over tent with green vestibule flaps locat-
	ed at the front of the tent. (Fig 3).
	NOTE: Hook and loop fasteners, located on seams of
	underside of Rainfly, should be centered over black &
	grey Main Poles.
2.	Insert black Rainfly Pole with through sleeve in
	underside of Rainfly above front door of tent. (Fig. 3)

Rainfly

		Rainfly Sleeve
		Black Rainfly
		Pole
	Door
	Front of Tent	Vestibule Flap
Vestibule Flap			Fig. 3

3. Insert short, black, thin Awning Pole through sleeve

in underside of Rainfly above window at back of tent.

(Fig. 4)

4. Insert metal tip into grommet on tent seam at back of tent (Fig. 4A). Go to opposite end of Awning Pole and gradually apply pressure to pole forming an arch; then insert metal tip into grommet.

(continued on other side)

Approximate

Grommet

location

on tent

Rainfly Sleeve Awning Pole

Back

of Tent

Approximate

Grommet

location

on tent

Fig. 4

Awning

Pole

Grommet

4A