Coleman 2000001586 Vestibule Flaps, Door & Window Flaps/Vents To Store, Things You Should Know

To Attach Rainfly continued

5.Insert end of each black Rainfly Pole into pin on either side of front door. (Fig. 5 & 5A)

6.Go to opposite end of Rainfly Pole and gradually apply pressure to form an arch. Insert the pin into pole end at other side of the door. (Fig. 5 & 5A)

7.Locate all hook & loop fasteners on underside of Rainfly and wrap around all Main Poles, Awning & Rainfly Pole to secure. (Fig. 5B) NOTE: Make sure longer hook & loop fastener on Rainfly is secured around grey and black Main Poles where they cross. (Fig. 5C)

8.Stretch elastic straps and hook clip on each to the metal loops at the front and back corners of the tent. (Fig. 5D)

9.Extend out vestibule flaps and secure with metal stakes through the loops in the web straps (Fig. 5 & 5E)

10.Stretch guylines until taut, then secure with stakes. (Fig. 5 & 5F)

Fig. 5

5C

5B

5A

	5E
5D	5F

Vestibule Flaps, Door & Window Flaps/Vents

To Store

1.Vestibule flaps may be rolled back and secured by inserting toggles through fabric loops. (Fig. 6)

2.For better ventilation, unzip door flap, roll, and insert toggle into fabric loop to secure. (Fig. 7)

3.To open back and side window vents for more ventilation, unzip,

then roll up and insert toggles through fabric loops.

Fig. 6

1.All poles and stakes must be placed in the storage bag to prevent damage to the fabric items placed in the carry case.

2.Make sure tent is clean and dry before placing in carry case.

3.Remove rainfly, spread out on floor of tent, then unzip door & vents before taking tent down for storage.

4.Neatly fold tent to width of pole storage bag, place on tent, roll tightly, and place in carry case.

5.Store in a clean, dry area.

Things You Should Know:

• Under certain conditions (cold weather, high humidity, etc.) condensa-

tion will form on the inside of your tent. Condensation is caused by water

vapor from your breath, perspiration, or any wet clothing inside the tent.

It is NOT LEAKAGE through the tent fabric. It can be minimized by

removing wet clothing from your tent and by providing good ventila-

tion through the tent.

• Tree limbs, tree sap, bird droppings, or moisture steadily dripping off

tree limbs can cause damage to the tent fabric and its coating resulting

in leaks or loss of flame-resistant properties.

STITCH LINE

Fig. 8 Fig. 7

Electrical Cord Access

1.Unzip access panel in the lower left front corner of tent and bring in electrical cord. Use only UL approved cords that are rated for outdoor usage. (Fig. 9)

Fig. 9

Cooler Access

The smaller zippered opening at the back of tent is designed for added ventilation and easy access to your beverage cooler.

1. To use as a vent, unzip flap to exposeFig. 10 screen. (Fig. 10)

2.To use as a cooler access, unzip other flap to make an avenue to bring beverages into tent. (Fig. 11)

Fig. 11

• Never store tent, even for a short period of time, without drying it

thoroughly and brushing off caked dirt. Do not pack stakes or poles

inside your tent. Use a separate storage bag.

• Stakes should be removed by pulling on the stake itself. NEVER PULL ON

THE TENT TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY

DAMAGE OR PERSONAL INJURY.

• Tent poles should not be left telescoped together during storage.

• Do not leave your tent set-up for weeks at a time. Be aware that exposure

to ultraviolet rays from the sun can seriously damage material and/or

cause it to become discolored.

WARNING: Keep all flame and heat sources away from this tent fabric.

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

The Coleman Company, Inc. • 3600 N. Hydraulic • Wichita, Kansas 67219

1-800-835-3278 • www.coleman.com

MADE IN CHINA • PRINTED IN CHINA

© 2008 The Coleman Company, Inc.

Coleman®, , andare registered trademarks and EvanstonTM is a trademark of

The Coleman Company, Inc.

4010003993 (20081114)