Rainfly
Pole

5. Insert metal tip of black rainfly pole into metal grommet located on front seams of tent (Fig. 11 & 11A). Gradually apply pressure to other end of pole to form an arch & insert metal tip into grommet.

6. Attach hook & loop fasteners, located on seams of the underside of Rainfly, around the black main poles, to secure. (Fig. 11B)

7. Clip hooks on elastic cords, on the front and back corners of Rainfly, onto metal loops at front and back corners

of tent. (Fig. 11C)

8. Stretch guylines until taut, then secure with stakes. (Fig. 11D)

Grommet

Electrical Cord Access

 

 

 

Fig. 17

1. Unzip the access panel in the lower left

 

 

 

 

 

corner of tent and bring in an

 

 

electrical cord.

 

 

NOTE: Use only UL approved cords rated

 

 

for outdoor usage. (Fig. 17)

 

 

 

 

 

 

 

 

To Store

1.

All “springs” must be rolled up and placed in bag with stakes.

2.

All poles and stakes must be placed in the storage bag to prevent damage

 

to the fabric items placed in the carry case.

3.

Make sure tent is clean and dry before placing in carry case.

4.

Remove rainfly, spread out on floor of tent, then unzip door & vents before

 

taking tent down for storage.

Fig. 11

11A

5.

Neatly fold tent to width of pole storage bag, place on tent, roll tightly, and

 

place in carry case.

6.

Store in a clean, dry area.

Things You Should Know:

Guyline

Black Main

Pole

 

11D

11B

11C

Self-rolling Windows

CAUTION: “Springs” may have sharp edges. Handle with care to avoid injury. Keep out of reach of children.

NOTE: Carefully unroll metal “springs” stored in bag with stakes. The color marking on each “spring” should match the color of the fabric “flag” sewn to the window or door sleeve opening. (Fig. 12)

1.Locate sleeve(s) in window panel, open hook & loop fastener; then insert “spring(s)” with matching color marking. (Fig. 12 & 13)

NOTE: When inserting into the sleeve(s), the color marking on the “spring(s)” should always face the operator.

2.Close hook & loop fastener to secure.

3.Before unzipping and opening the window, push in at top to engage “spring(s)” to activate the self-rolling feature. (Fig. 14)

4.Unzip to allow the window panel to roll down automatically; zip back to close window panel. (Fig. 15 & 16)

NOTE: Repeat steps above for inserting the color matching “spring(s)” into sleeve(s) for the rest of the windows.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color “Flag”

 

 

 

 

 

 

Color

 

 

 

Push in at top

 

 

 

 

 

 

 

 

 

 

 

 

to engage “spring(s)”

 

 

 

 

Sleeve

 

 

 

 

 

 

“Flag”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Color

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Dot

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 12

 

 

 

 

Fig. 13

 

 

 

Fig. 14

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Door

 

 

 

Window Panel

 

 

 

 

 

 

 

 

 

Window

 

 

 

 

Sleeves

 

 

 

 

 

 

 

Panel

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Fig. 15

 

Fig. 16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION: All “springs” must be removed from sleeves before tearing down tent to avoid damage to the tent fabric or part. To avoid injury, carefully roll up “springs”. Keep out of reach of children. Store rolled “springs” in bag with stakes.

Under certain conditions (cold weather, high humidity, etc.) condensation will form on the inside of your tent. Condensation is caused by water vapor from your breath, perspiration, or any wet clothing inside the tent. It is NOT LEAKAGE through the shelter fabric. It can be minimized by removing wet clothing from your shelter and by providing good ventilation through the tent.

Tree limbs, tree sap, bird droppings, or moisture steadily dripping off tree limbs can cause damage to the tent fabric and its coating resulting in leaks or loss of flame-resistant properties.

Never store tent, even for a short period of time, without drying it thoroughly and brushing off caked dirt. Do not pack stakes or poles inside your tent. Use a separate storage bag.

Stakes should be removed by pulling on the stake itself. NEVER PULL ON THE TENT TO REMOVE STAKES AS THIS COULD RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY.

Tent poles should not be left telescoped together during storage.

Do not leave your tent set-up for weeks at a time. Be aware that exposure to ultraviolet rays from the sun can seriously damage material and/or cause it to become discolored.

WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.

This tent meets the flammability requirements of CPAI-84. The fabric may burn if left in continuous contact with any flame source. The application of any foreign substance to the tent fabric may render the flame-resistant properties ineffective.

The Coleman Company, Inc. • 3600 North Hydraulic • Wichita, Kansas 67219 U.S.A.

1-800-835-3278 • www.coleman.com

MADE IN CHINA

©2011 The Coleman Company, Inc. All rights reserved.

Coleman®, , and are registered trademarks of

The Coleman Company, Inc.

4010006299 (ECN20018377-02)

STITCH LINE

Page 2
Image 2
Coleman 2000004659 manual To Store, Self-rolling Windows