Coleman 2000004659 manual Pole Descriptions, To Set Up Tent, Hinged, Rigid Door

Elite SunDOME® 6 Tent Model 2000004659

STITCH LINE

Before you begin

•Read all instructions before set up.

•Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent.

WARNING: Keep clear of overhead power lines.

•Do not set up your tent under trees because of potential lightning strikes or falling tree limbs in inclement weather.

•Secure with all stakes and guylines provided to prevent property damage or personal injury.

•For best results in windy conditions, position narrow end of tent into the wind.

•Enlist the help of at least one other person to assist you when it is time to assemble the tent.

Pole Descriptions

Description	Qty.	Pole	Pole
		Repair Kit	Replacement Kit
Main Poles, long, black	2	5010000539	5010000549
Rainfly Pole, black
w/metal tips	2	5010000542	5010000552
Vertical Door Pole, black,
short w/rubber tips	1	5010000543	5010000545
Door Pole, black,
long w/rubber tips	1	5010000543	5010000545

Self-Rolling Window Spring Descriptions

Color Code Description	Qty.	Replacement Part No.
Yellow	1	5010000626
Orange	1	5010000628

CAUTION: “Springs” may have sharp edges. Handle with care to avoid injury. Keep out of reach of children.

To Set Up Tent

1.Unfold tent and spread out on a clean, level surface with the door facing the desired direction. (Fig. 1)

2.Assemble two main tent poles by interlocking the longer, black shock- corded poles.

3.Insert both, long, black poles through sleeves in top of tent as shown. (Fig. 1)

Fig. 1

Long, Black,

Shock-corded

Main Poles

Door

Front of Tent

4.Insert one end of each black pole into pins in front corners of tent. (Fig. 2)

Fig. 2

5.Go to opposite end of each pole and gradually apply pressure to the pole forming an arch. Insert the pin into the pole end at the corners of tent. (Fig. 3)

6.Attach frame clips along edges of tent to black main poles. (Fig. 3A)

7.Stretch corners and sides of tent until floor is taut then hammer stakes through loops to secure. (Fig­ . 3B)

Fig. 3

Door

3A3B

Hinged, Rigid Door

1.Assemble Vertical Door Pole (shorter black pole with plastic tips); then insert through zippered vertical pole sleeve on hinged side of door. (Fig. 4)

2.Insert end of Vertical Door Pole into bottom hinge plate, apply pressure to form a slight bow, then insert other tip of pole into top hinge. Zip up vertical pole sleeve. (Fig. 5 & 6)

3.Assemble Door Pole (longer black pole with plastic cap tips); then insert into zippered pole sleeve at top of door. (Fig. 7)

4.Insert end of Door Pole into top hinge plate, apply pressure to form a bow, then insert other tip of pole into the bottom hinge. (Fig. 8)

5.Zip up pole sleeve to enclose Door Pole. (Fig. 9)

Fig. 4 Fig. 5 Fig. 6

Vertical Pole

Sleeve

Door Hinge

		Fig. 7	Fig. 8
Top
Door	Pole
Hinge				Fig. 9
	Sleeve

To Attach Rainfly

1.Assemble longer interlocking shock-corded rainfly pole.

2.Unfold rainfly. Locate the sleeve, along front edge, and the hook & loop fasteners on the underside of Rainfly.

3.Drape Rainfly over tent. Make sure the sleeve is centered over the door and the hook & loop fasteners, on the seams on underside of the Rainfly, are positioned over the

black main poles.			Rainfly
4. Slide rainfly pole
			Pole
through sleeve at front
	Rainfly
of the Rainfly. (Fig. 10)	Sleeve
		Door
(continued on
			Fig. 10
other side)