AVR

Set Up the AVR

Set Up the AVR

In this section, you will configure the AVR to match your actual system’s makeup. Although it’s possible to configure the AVR using only the remote and the messages on the AVR’s front-panel display, it is easier if you use the full-screen menu system.

Turn On the AVR

1.Set the rear-panel Main Power switch to “On.” (The front-panel Power indicator will glow amber.)

2.Press the front-panel Power button.

Main Power

Power

Switch

Button

Unless you will not be using the receiver for an extended period of time, leave the Main Power switch set to “On.” When the Main Power switch is turned off, any settings you have programmed will be preserved for up to four weeks.

IMPORTANT NOTE: If the PROTECT message ever appears in the Message Display, turn off the AVR and unplug it. Check all speaker wires for a short-circuit (“+” and “–“ wires touching). If none is found, bring the unit to an authorized Harman Kardon service center for inspection and repair before using it again.

Using the On-Screen Menu System

To access the menu system, press the AVR button on the remote or the front panel. The Main Menu will appear, and if a video source is playing, it will be visible behind the menu.

Source Select

Select the Source Device to Enjoy

Setup Source

Setup Source Devices Connected to the AVR

Speaker Setup

Speaker Optimization, EQ

Zone 2

Manage and Control Zone 2

System

General AVR Settings

NOTE: When you are using the AVR’s on-screen menu system, we recommend a video output resolution of 720p or higher for easiest viewing and for graphics that simplify some configuration options. Depending on the resolution selected, the menus shown by your system may vary in appearance from the illustrations.

The Main Menu system consists of six submenus: Source Selection, Setup Source, Speaker Setup, Zone 2, System and Settings Lock. Use the Up/Down/Left/Right buttons on the remote or the front panel to navigate the menu system, and press the OK button to select a menu or setting line, or to enter a new setting.

The current menu, setting line or new setting will appear in the front-panel Message Display, as well as on screen.

To return to the previous menu or exit the menu system, press the Back/Exit button. Be certain all settings are correct, as any changes you have made will be retained.

Most users should follow the instructions in this Set Up the AVR section to configure a basic home theater system. You may return to these menus at any time to make additional adjustments, such as those described in the Advanced Functions section, on page 33.

Before beginning the following setup steps, all loudspeakers, a video display and all source devices should be connected. You should be able to turn on the AVR and view the main menu when you press the AVR button. If necessary, reread the Making Connections and Set Up the Remote sections before continuing.

Configure the AVR for Your Speakers

1. Plug the supplied EzSet/EQ microphone into the AVR’s Headphone connector.

AVR

Headphone

Connector

EzSet/EQ Microphone

(supplied)

2.Place the microphone at ear height in your listening position. The microphone features a threaded insert on the bottom for mounting on a camera tripod.

3.Set the volume control on your subwoofer to approximately the halfway point.

4.Turn on your TV and select the TV input where you connected the AVR in Connect Your TV or Video Display, on page 17.

5.Press the remote control’s AVR button. The AVR’s on-screen display (OSD) Main Menu screen will appear on the TV.

Source Select

Select the Source Device to Enjoy

Setup Source

Setup Source Devices Connected to the AVR

Speaker Setup

Speaker Optimization, EQ

Zone 2

Manage and Control Zone 2

System

General AVR Settings

ENGLISH

25

Page 25
Image 25
Harman-Kardon AVR 3650, AVR 2650 owner manual Set Up the AVR, Turn On the AVR, Using the On-Screen Menu System

AVR 365, AVR 265, AVR 3650, AVR 2650 specifications

The Harman-Kardon AVR 2650 and AVR 3650 are part of a distinguished line of AV receivers that combine high-performance audio and video capabilities with sophisticated technology. Designed to enhance the home entertainment experience, these models stand out for their rich feature sets and exceptional sound quality.

The AVR 2650 is a 7.1-channel receiver that delivers 95 watts per channel, providing robust audio output for both movies and music. It boasts advanced audio processing technologies, including Dolby TrueHD and DTS-HD Master Audio, ensuring that every sound detail is faithfully reproduced. The inclusion of a USB port allows users to connect and play audio files directly from compatible devices, while built-in Bluetooth connectivity offers seamless streaming from smartphones and tablets.

In terms of video performance, the AVR 2650 supports 4K Ultra HD content and is equipped with HDMI inputs that facilitate multiple device connections. The unique Harman Kardon EzSet/EQ feature facilitates easy setup and calibration, optimizing the audio experience based on the room's acoustics for a perfect balance.

The AVR 3650, on the other hand, offers a more advanced setup with 9.1-channel processing and a higher output wattage of 105 watts per channel. This model is designed for audiophiles who demand the utmost in sound clarity and immersive experiences. The AVR 3650 boasts additional features, such as multi-zone capability, allowing users to enjoy different audio sources in multiple rooms simultaneously.

Both models incorporate advanced surround sound technologies, providing 3D audio immersion that complements modern films. Furthermore, these receivers feature HDMI pass-through, which allows for easy switching between high-definition sources without compromising signal quality. Moreover, the AVR series supports a variety of high-definition audio formats, ensuring playback of the latest audio technologies.

The AVR 265 and AVR 365 are earlier models but share core characteristics that define Harman-Kardon's legacy in the audio market. They offer similar surround sound capabilities and are engineered to provide outstanding audio fidelity. Compatible with various streaming services, these models ensure that users have access to a broad array of entertainment options right at their fingertips.

In summary, the Harman-Kardon AVR 2650 and AVR 3650, along with the AVR 265 and AVR 365, continue the brand's tradition of blending innovative technology with user-friendly design. Whether for casual listening or a full home theater setup, these receivers deliver stunning performance, making them an ideal choice for any audio enthusiast.