Fig. 1

Fig. 5

Fig. 2

Fig. 3

Fig. 7

Fig. 6

Fig. 4

Fig. 8

MODEL 2000007832
STITCH LINE
TENT SETUP INSTRUCTIONS
Before you begin
tRead all instructions before set up.
tSelect a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
tDo not set up your tent under trees because of potential lightning
strikes or falling tree limbs in inclement weather.
tSecure with all stakes and guylines provided to prevent property
damage or personal injury.
tFor best results in windy conditions, position narrow end of tent
into the wind.
tDo not drop tent.
tDo not bounce tent bag on its end to remove tent, as these
actions may damage the frame.
tTHIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO
PEOPLE TO ASSEMBLE.
tUnder no circumstances should this product be used to cover
automobiles, marine products or similar items.
CAUTION: Avoid pinch points when opening and closing the
tent frame.
(continued on other side)

Extend the Tent Frame

Raise the Tent

tStand the tent upright with the hub assembly at the
top. (Fig. 1)
tUnfold the arms of the tent downward until they lay flat on
the ground. (Fig. 2)
1
2
3

Verify Connections

between Tent and

Frame Poles

tVerify the clips along the edges of the tent are properly
attached to the frame poles. (Fig. 7 and Fig. 8)
tUnfold the arm joints located at each of the tent corners.
The tent will raise as the leg poles are extended.
(Fig. 3 and 4)
tExtend each of the telescoping leg poles until they snap
into place. (Fig. 5 and 6)

Clip Pole