Coleman 2000008349 manual Raise the Screenhouse

STITCH LINE

SCREENHOUSE setup INStructions

	MODEL 2000008349
Before you begin	Raise the Screenhouse
• Read all instructions before set up.	• Extend each of the telescoping leg poles until they snap
• Select a level site clear of rocks, branches, and other hard or
	2 into place. The screenhouse will raise as the leg poles are
sharp objects, to install your screenhouse.
WARNING: Keep clear of overhead power lines.	extended. (Fig. 4)

•Do not set up your screenhouse under trees because of potential lightning strikes or falling tree limbs in inclement weather.

• Secure with all stakes and guylines provided to prevent property
damage or personal injury.
• For best results in windy conditions, position narrow end of
screenhouse into the wind.
• Do not drop screenhouse.	Lock Button
• Do not bounce screenhouse bag on its end to remove
screenhouse, as these actions may damage the frame.

•THIS RECREATIONAL PRODUCT REQUIRES A MINIMUM OF TWO

PEOPLE TO ASSEMBLE.

•Under no circumstances should this product be used to cover

automobiles, marine products or similar items.	Fig. 4
CAUTION: Avoid pinch points when opening and closing the
screenhouse frame.

Description	Repair Kit	Description	Repair Kit	3	Stake the Screenhouse
Plastic Clip 16 mm	5010000845	Plastic Corner Joint	5010000853		• Secure screenhouse by driving stakes through the
Plastic Clip 20 mm	5010000846	Fabric Joint Cover	5010000855
					webbing loops sewn to the screenhouse base.
Fabric Repair Kit	5010000852
					(Fig. 5 and Fig. 6 )
Extend the Screenhouse					• Keep the floor taut.
1 •FrameStand the screenhouse upright with the hub assembly at
the top. (Fig. 1)
• Unfold the arms of the screenhouse downward until they
lay flat on the ground. (Fig. 2)
• Fully extend the arms of the screenhouse away from the
center hub till the telescoping pole sections are locked in
place. (Fig. 3 and Fig. 3A)

			Fig. 5
Fig. 1	Fig. 2	Webbing Loop	Stake
	Fig. 3A	Fig. 6
	Fig. 3		(continued on other side)