![Assembly and Instruction Sheet](/images/new-backgrounds/46215/462151x1.webp)
®
Assembly and Instruction Sheet
for 30” Round Fireplace
Models 5056-707 & 5059A700
Follow these instructions for assembly and read carefully, particularly the safety statements. The safety alert symbol, is a universally recognized symbol used to identify safety information about hazards that can result in personal injury. When this symbol is used you should pay very close attention to what is written. Review these instructions before beginning assembly or using your fireplace.
FOLLOW INSTRUCTIONS AND WARNINGS TO AVOID FIRE,
SERIOUS INJURY OR DEATH.
WARNING
•Outdoor use only. Never use in enclosed area. Use in unventilated areas will endanger your life.
•Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
•Use on a level, noncombustible surface only. Keep away from house, garage, balconies, or eave overhangs.
•Keep out of the reach of children.
•Be sure screen is in place while in use and do not use in windy conditions.
•Do not overfill firebowl or use to burn leaves and trash.
•Exercise the same care you would with an open fire.
•Never leave unit unattended when hot or in use.
•Completely extinguish fire before leaving.
•Use gloves when handling or moving. Ashes can remain warm for a long time after extinguishing.
•Dispose of cold ashes properly.
•Do not modify in any way nor use with parts not expressly approved by Coleman.
•Combustion
Contact local authorities regarding possible burn restrictions before using product.
Fireplace Parts Check List
|
| • Check package for all parts needed for assembly. | |||
■ | 1. | Protective Cover | ■ | 6. | Screen Lifting Tool |
■ | 2. | Firebowl | ■ | 7. | Screen Assembly |
■ | 3. | Leg Support Ring | ■ | 8. | Hardware Kit w/Handle |
■ | 4. | Firebowl Support Ring | ■ | 9. | Grate |
■5. Leg Brackets
1 | 2 | 3 |
|
|
4
9
5
8
7
6
•Check all items for shipping damage. Call Coleman at
Assembly
1. Carefully unpack all parts from shipping box.
2. Assemble Leg Brackets to Leg Support Ring as shown. Attach with screws. Hand tighten.
Leg
Bracket
Assembly (cont.)
3. Place Firebowl Support Ring on top of Leg Brackets as shown. Attach with screws. Hand tighten.
Firebowl Support Ring | Align holes |
Leg Bracket
4. Tighten all screws in Leg Support Ring and Firebowl Support Ring.
Leg Support
Ring
(continued on other side)