HP 14 Ultrabook manual Display assembly

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 42).

5.Remove the keyboard (see Keyboard on page 46).

6.Remove the top cover (see Top cover on page 50).

7.Remove the hard drive (see Hard drive on page 54).

8.Remove the USB board (see USB board/audio jack on page 57).

9.Remove the WLAN (see WLAN module on page 58).

10.Remove the system board (see System board on page 61).

Remove the RJ-45 cover:

1.Remove the Phillips M screw (1) for the RJ-45 cover.

2.Lift the RJ-45 cover (2) to remove it from the base enclosure.

Reverse these procedures to replace the RJ-45 cover.

Display assembly

Description	Spare part number
35.6 cm (14.0 in), high definition (HD), WLED, SVA BrightView TouchSmart slim display	721218-001
assembly, for use with HP Pavilion TouchSmart Sleekbook and HP Pavilion TouchSmart
Ultrabook models
35.6 cm (14.0 in), high definition (HD), WLED, SVA BrightView flat display assembly, for use
with HP Pavilion Sleekbook and HP Pavilion Ultrabook models. The display assembly is spared at
the subcomponent level only.

IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.

78 Chapter 5 Removal and replacement procedures