NOTE: These procedures are for replacing the display panel for HP Pavilion Sleekbook and HP Pavilion Ultrabook models.
Description | Spare part number |
|
|
Display bezel | |
|
|
35.6 cm (14.0 in), HD, WLED, SVA BrightView flat display panel | |
|
|
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
Before removing the display panel, follow these steps:
1.Shut down the computer.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 42).
NOTE: To replace the entire display assembly, additional steps are required (see Display assembly on page 78).
Remove the panel:
1.Remove the plastic screw covers (1) and the two Phillips screws (2) that secure the display bezel to the display assembly.
2.Flex the inside edges of the bottom edge (1), the left and right sides (2), and the top edge (3) of the display bezel until the bezel disengages from the display enclosure.
44 Chapter 5 Removal and replacement procedures