Coleman 923D129 manual Layout & Positioning of Tent, Pole Assembly Parts

AMERICAN HERITAGE® WEATHERMASTER® CABIN 12'X9'

Instructions apply to Part Number 9232D129

When You Are Ready To Set Up Your Tent

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, position the end of tent into the wind.

POLE ASSEMBLY PARTS

(2)Center Adjustable Poles (Red Sticker) Part No. 9232-1301

(4)End Adjustable Poles (Green Sticker) Part No. 9232-1311

(1)Curved Ridge Roof Poles (Red Sticker) Part No. 9232-1321

(2)Curved End Roof Poles (Green Sticker) Part No. 9232-1331

Vertical Hinged Door Pole

Part No. 9232-1351

Hinged Door Pole

Part No. 9232-1361

Rainfly Part No. 9232-1341

1	Layout & Positioning of Tent
	– Layout and position tent with door
	facing desired direction. (illus. 1)
	– Stake down tent, starting with	Roof sleeve

the corners. Do not stretch

too tight. Angle the stakes slightly toward the tent. (illus. 2) Keep the floor taught.

– Unzip the door.

illus. 1

illus. 2

Stake loops properly staked

Front door

2 Assemble & Place Roof Poles

– Assemble all shock-corded roof poles. When assembled will form a continuous arch with both ends pointing down. (illus. 3)

– Insert the curved ridge roof pole through center roof pole sleeve. (illus. 4)

– Insert the curved End roof poles through end roof pole sleeves. (illus. 4)

Forms an arch

Shock-corded poles

illus. 3 Curved roof pole assembly.

Pole sleeves

illus. 4 Curved roof pole system shown inserted through pole sleeves. (3 total)