When You Are Ready To Set Up Your Tent | Coleman 9273A827C instruction

Instructions apply to Part Number 9273A827C

–Select a level campsite clear of rocks, branches and other hard or sharp objects.

–Do not set up your tent under trees.

–For best results in windy conditions, do not position the door of tent into the wind.

POLE ASSEMBLY PARTS

Part No. 9273A2231

(2)Main Tent Poles

Part No. 9273A2241

(1)Rainfly Pole

Rainfly Part No. 9273A2221

–Layout and position tent with door facing desired direction. (illus. 1)

–Unzip door.

–Stake down tent corners only, using the rings at the end of the stake loops. Keep the floor taut. (illus. 2)

–Assemble frame poles by interlocking shock-corded poles. This will make two long poles.

–Insert the poles diagonally into pole sleeves. The center of the poles should cross forming an “X” in the middle of tent. (illus. 1)

Assembled poles inserted through pole sleeves

illus. 1

illus. 2 Tent stake

through ring

– Insert one end of main tent pole end onto pin of pin & ring system, at tent corner. (illus. 3)

– Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you are able to insert the pin into the pole.

– Repeat for second pole.

illus. 4

Tent frame set-up

illus. 3

Insert pole end onto pin & ring