Coleman 9392-540 manual 14’ x10’ SkyDome Screenhouse, Pole Assembly, Assembly Parts

Poles inserted

into hub

Illus. 2

14’ x10’ SkyDome Screenhouse

Instructions apply to Part Number 9392-540

When You Are Ready To Set Up Your Shelter

–Select a level area clear of rocks, branches and other hard or sharp objects.

–Do not set up your shelter under trees. –For easier set up, two or more people

are recommended.

–Place fabric in center of selected location and assemble above fabric.

1 Pole Assembly

–You will need to assemble and connect one pole at a time to the hub.

–Do not completely assemble poles.

a)Beginning at spring-clip end of pole, assemble all but the last shock-corded section. The pole and one section should curve downward. (illus. 1)

b)Locate the center top clip on the fabric and attach it to the Hub

(illus. 1), (illus. 3)

c)Starting at the corner, Insert the spring-clip end of the pole through the webbing loop and then into the

pole sleeve pushing it toward the center (illus. 1)

d)Insert the spring-clip end into one of the hub ports until it clicks into position. That pole will now partially stand up. (illus. 2), (illus. 3), (illus. 4)

e)Repeat for each of the three remaining poles (illus. 3)

ASSEMBLY PARTS

Poles (4) Part No. 9392-1201

Hub (1) Part No. 9392-1261

Pole Sleeves

Hub clipped to fabric

Webbing

Loop

Illus. 1

Poles inserted through

webbing loop and

pole sleeves

Hub

Illus. 3

Poles clipped into position in

the hub