Coleman 9805-130 manual Blaze solo, Layout & Positioning, Tent, Pole Assembly

blaze solo

part number 9805-130

POLE ASSEMBLY PART

Main Tent Pole (1) Silver)

Part No. 9805-1001

Foot Pole (1)_ Gold Tips	Rainfly
Part No. 9805-1002	Part No. 9805-1051

Layout & Positioning	Zipper Door	Pole Sleeve
1 of Tent, Pole Assembly

– Layout and position tent with door facing desired direction. (illus. 1)

– For best results in windy conditions position end of tent into the wind.

–Stake down tent corners using the stake loops. Keep the floor taut. Unzip door. (illus. 2)

–Assemble Frame Poles by interlocking shock-corded sections. This will make one long and one short curved pole.

–Insert the longer pole through the pole sleeve located in the middle of the tent and the shorter pole into the sleeve at the foot of the tent (illus. 1)

2 Connect Frame to Tent

–Insert one Pole Tip into grommet on stake loop located at middle edges of the tent.(illus. 3).

–Go to opposite end of pole and gradually apply pressure to the pole forming an arch until you

are able to insert the pole tip into the grommet.

(illus. 3 & 4)

illus.3

Insert Pole Tip into grommet

illus. 1

illus. 2 Tent stake through Loop

illus.4

Tent completely set up

and staked out.