Coleman 9928 manual Grill Assembly, Assemble the Towing Handle, Extend the Grill Support

Grill Assembly

IMPORTANT: Remove all packing material prior to assembly/use. If your grill has stainless steel components, remove all protective plastic film from stainless steel parts prior to assembly/use. This film is installed at the factory to prevent damage that could occur during shipment and handling.

Assemble the Towing Handle

1.Place the grill on a flat and level surface. Insert the towing handle into the rectangle tubing in the stand (Fig. 3).

Fig. 3

Locking

Button

2.Depress the locking buttons at the same time, then slide the towing handle until it locks in place (Fig. 4).

Fig. 4

Extend the Grill Support

3.Make sure the Towing Handle is extended and locked in position (Fig. 3).

4.Place one foot on the Towing Handle, grasp the lift handle and lift to extend the grill stand (Fig. 5).

Fig. 5

5.Continue to lift the grill until the stand extends past the locking bracket (Fig. 6).

Fig. 6

6.Carefully lower the grill into the grill stand, making sure the unit is secured in the upright position (Fig. 7).

Fig. 7

7. The locking bracket must engage the stand (Fig. 8).

Fig. 8

Locking

Bracket

English-5