CAUTION

SERVICE SAFETY

Keep all connections and fittings clean. Inspect propane cylinder and skillet propane connections for damage before attaching.

During set up, check all connections and fit- tings for leaks using soapy water. Never use a flame. Bubbles indicate a leak. Check that the connection is not cross-threaded and that it is tight. Perform another leak check. If there is still a leak, remove the cylinder and contact Coleman for service or repairs.

Use as a cooking appliance only. Never alter in any way or use with any device or part not expressly approved by Coleman.

Clean skillet frequently to avoid grease accu- mulation and possible grease fires.

Technical

Characteristics

Input: 8,000 BTU/H

Category: Pressure regulated propane

Fuel: 16.4 oz. disposable propane cylinders

Regulator: 9933

To Set Up

Remove components from carton. (Fig. 1)

Fig. 1

Assemble feet to skillet. Attach each foot to skillet using one screw. (Fig. 2) NOTE: Screwdriver is not provided.

Fig. 2

Assemble handle to skillet lid using two screws. (Fig 3)

Fig. 3

Install cooking surface (Fig. 4)

Fig. 4

Turn off regulator valve. (Fig. 5)

Fig. 5

Firmly snap regulator into skillet. (Fig. 6)

Fig. 6

Remove plastic cap from top of propane bottle and screw propane bottle into regulator hand tight. (Fig. 7)

Fig. 7

English-4

Page 5
Image 5
Coleman 9933 instruction manual Technical Characteristics, To Set Up, English-4, Service Safety