Fig. 11
INSTASTART™
Electronic Ignition Skillet
■Set on sturdy, flat surface. For outdoor use only.
■Open regulator valve and push igniter button
repeatedly until burner lights. (Fig. 12 and 13) Note: If igniter fails to light skillet, use match to
light burner. If the skillet is wet the ignitor may not spark.
|
|
|
|
|
| Fig. 12 |
|
| Fig. 13 |
■Adjust flame with
regulator valve. (Fig. 14)
Fig. 14
■A good flame should be blue with minimal yellow tip. Some yellow tips on flames are acceptable as long as no carbon or soot deposits appear. (Fig. 15)
GOODBAD
Blue
Yellow
Yellow Blue
Holes in Burner
Fig. 15
NOTE: If the burner flame is accidentally extinguished, turn off the regulator valve and wait 5 minutes before relighting the appliance.
Tips Before Cooking
CAUTION
DO NOT place a pot or a pan on skillet surface. Damage will occur and void the warranty.
■Skillet has a nonstick coating. Use only non- metallic utensils to prolong life of nonstick coating.
■To reduce sticking and improve
To Turn Off
■Turn off regulator valve. (Fig. 17)
Fig. 17
To Clean
■Make sure skillet is cool.
■Move skillet away from flame (including pilot lights) and other ignition sources.
■Remove propane cylinder from regulator and replace protective cap on cylinder. (Fig. 18)
■Remove regulator from skillet. (Fig. 19)
|
|
|
|
|
| Fig. 18 |
|
| Fig. 19 |
|
|
|
|
|
■Wipe clean with soft cloth and mild dish deter- gent. Do not use abrasives. (Fig. 20)
Fig. 20
■For storage or transport, regulator may be located below cooking surface. (Fig. 21 and Fig. 22)
Fig. 21
Fig. 22
