Maintenance
WARNING
•Do not overheat grill. Stainless steel loses
•About stainless steel - Stainless steel exposed to prolonged periods of high heat will change color and texture. Coleman grills require little preheating. Texture and color change is normal on interior components and will not affect the operation or performance of the product.
•Cleaning - Clean the exterior surface after every use. Use soapy water with a soft cloth or sponge. Rinse thoroughly with fresh water and dry. We recommend covering the grill between uses. Optional covers are available from Coleman retailers or direct from Coleman.
CAUTION: Abrasive pads or cleaners will damage the finish.
•Interior components - Remove heavy residue from grill and empty grease tray between each use. We recommend cleaning all accessible surfaces, and all removable components, at least once a year, depending on amount of use, and always prior to long term storage.
•Grill grates - Clean with brass wire brush while grill is warm. Wash with soapy water and dry prior to storage.
•Ceramic electrode - Located just beside the burner, it should be kept clean of grease and debris. Be careful not to damage the ceramic insulator or bend the wire. See page 11 for proper electrode spark adjustment.
•Control valve - All valves are set and tested at our factory. Do not attempt to adjust or disassemble the valve in any way. Call Coleman if you suspect it's not adjusted properly. Clean valve with a clean cloth and remove any debris obstructing the gas outlet orifice.
Grill Assembly
Remove components from carton and check the the following list to make sure all parts are accounted for before proceeding.
1
2
3
8
4
7
6
5
1. Grill | 4. Heat Tents (2) | 7. Crumb Tray |
2. Regulator | 5. Tabletop Legs (2) | 8. Grease Tray |
3. Grill Grates (2) | 6. Warming Rack |
|
See page 15 for
Replacement Parts List and ordering instructions.
5
