TECHNICAL GUIDE
GAS-FIRED RESIDENTIAL
SINGLE STAGE
GAS FURNACES
STANDARD &Low NOx MODELS
MODELS: TM8X / TMLX
NATURAL GAS
60 - 120 MBH INPUT
EFFICIENCY
RATING
CERTIFIED
ISO 9001
Certified Quality
Management System
Due to continuous product improvement, specifications are subject to change without notice.
Visit us on the web at www.york.com Additional rating information can be found at
www.ahridirectory.org
WARRANTY
Extended
DESCRIPTION
These compact units employ induced combustion, reliable hot surface ignition and high heat transferaluminized tubular heat exchangers. The units are factory shipped for installation in upflow or horizontal applications and may be converted for downflow applications.
These furnaces are designed for residential installation in a basement, closet, alcove, attic, recreation room or garage and are also ideal for commercial applications. All units are factory assembled, wired and tested to assure safe dependable and economical installation and operation.
These units are Category I listed and may be common vented with another gas appliance as allowed by the National Fuel Gas Code.
FEATURES
•Easily applied in upflow, horizontal left or right, or downflow installation with minimal conversion necessary.
•Compact, easy to install, ideal height 33" tall cabinet.
•
•Easy access to controls to connect power/control wiring.
•
•Low unit amp requirement for easy replacement application.
•All models are convertable to use propane (LP) gas.
•Electronic Hot Surface Ignition saves fuel cost with increased dependability and reliability.
•100% shut off main gas valve for extra safety.
•5 speed direct drive, X13 style high efficiency DC motor.
•24V, 40 VA control transformer and blower relay supplied for
•
•Timed on, adjustable off blower capability for maximum comfort.
•Blower door safety switch.
•Solid removable bottom panel allows easy conversion.
•Low NOx models have been designed to meet specific code requirements.
•Airflow leakage less than 1% of total airflow at ductblaster conditions.
•No knockouts to deal with, making installation easier.
•Movable duct connector flanges for application flexibility.
•Quiet inducer operation.
•Inducer rotates for easy conversion of venting options.
•Fully supported blower assembly for easy access and removal of blower.
•External air filters used for maximum flexibility in meeting customers IAQ needs.
•Venting applications - may be installed as a common vent with other
•1/4 turn knobs provided for easy door removal.
•
•Insulated blower compartment for thermal and acoustic performance.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE