4. Insert post on cable ties into holes provided on the lower handle. Pull cable tie tight and trim excess. See Figure 4.
Figure 4
5. Each wheel has a height adjustment lever to change the cutting height of the mower. To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down to selected height. See Figure 5.
3
Setup and
Adjustments
NOTE: All wheels must be in the same height of cut.
When cutting in heavy
or moist grass, the rear
of the lawnmower may
be raised higher to allow better discharge
of the grass.
6.Your mower has been shipped as a mulcher. To discharge grass to the side, lift mulching plug. Slide the two hooks on the side discharge deflector under the hinge pin on the mulching plug assembly, see Figure 6. Lower the mulching plug.
Figure 5
!
" 
Figure 6
