Solutions for Daily Living
Contour Ultima™
Stainless Steel Bath Chairs
Models #8520, 8620, 8720, 8920
Thank you for Choosing Columbia!
Your Columbia Contour Ultima Stainless Steel Bath Chair has been built to the highest standards of quality to ensure years of superior service. Please take the time to read these assembly instructions and pay particular attention to the safety information provided. Thank you again for choosing Columbia!
Important Safety Instructions
When using your bath chair, always take basic safety precautions to reduce the risk of injury to persons.
1.Read and understand all instructions.
2.Determine, with a physician or therapist, the suitability of this product for the intended user.
3.To reduce the risk of injury or drowning, never leave the user unsupervised or unattended.
4.Check regularly that all tubing, bolts, buckles and other parts are tight at all times.
5.When in use, buckle up the user at all times.
Save These Instructions
Assembly of Your Contour Ultima Reclining Bath Chair
Your Contour Ultima comes fully assembled. After removing the chair from chair packaging, do not cut plastic ties around adjustment bars. (The plastic ties help keep the adjustment lever bars in position.) The Ultima’s frame is constructed from surgical grade stainless steel and the ComfortMesh™ cover is made with the highest quality material.
Assembling the Back Support (8720 & 8920 only)
1.Pull on the
2.Remove bolts and nuts from post with an Allen Wrench and insert the
3.Insert end of Pull Handle into the small holes on the
4.Pull the Pull Handles until Back Support and Calf Support are pointing straight up.
5.Slip the Bath Chair Cover over the Back Support, making sure the Pull handles are under the cover.
6.Place chair in are horizontal position, then turn chair upside down and fasten Velcro strap.
Setting the Angle of the Contour Ultima Bath Chair
The Contour Ultima is easy to adjust using the four simple adjustment lever bars, located on the front leg, back leg, under the cover of the Chair’s back and under the cover of the Chair’s calf support. The legs, calf support and back angles each adjust independently.