Columbian Home Products 8520 Adjusting Back Angle, Adjusting Calf Support Angle, Adjusting Legs

8520, 8620, 8720, 8920 Contour Ultima Rev: 11.06

Adjustments to the Ultima should not be made while in use.

Adjusting Back Angle:

Locate the adjustment lever bar on the Chair’s back, under the cover (you do not need to remove the cover to operate the lever), and simply grip the lever and seat frame back and squeeze together. Then, with a lifting motion, adjust the back angle up or down.

Adjusting Calf Support Angle:

Locate the adjustment lever bar on the Chair’s calf support, under the cover (you do not need to remove the cover to operate the lever), and simply grip the lever and seat frame back and squeeze together. Then, with a lifting motion, adjust the back angle up or down.

Adjusting Legs:

Locate the adjustment lever bar on each leg where it crosses the non-slip pads. By gripping the lever and pads, squeeze together and with a lifting motion, adjust the angle up or down. Warning: The legs should never be

used in the most upright position.

ADJUSTING ANY HIGHER THAN MAXIMUM LEG HEIGHT ADJUSTMENT

WILL CAUSE THE CHAIR TO BECOME UNSTABLE WHILE IN USE

Max. leg height position -90° position, do not use

INSE-85-20 2-3