Using the Travel System Guardrail
CAUTION
Pull on each side of Travel System Guardrail to make sure that it is completely attached.
ATTACHING THE TRAVEL SYSTEM GUARDRAIL
1.After removing the Kid’s Tray Guardrail attach the Travel System Guardrail by slipping it over the armrest pins until you hear the pins click into position. Gently tug on the side, to be sure it is secure.
2. Recline the backrest to the middle position or lower.
3.Lock the “V” slot of the COMBI Infant Car Seat/Carrier over the Travel System Guardrail.
4.Rotate until the foot end of COMBI Infant Car Seat/Carrier locks into the Infant Car Seat/Carrier Locks located on each side of the handle.
5.Be certain that the COMBI Infant Car Seat/Carrier is securely attached to the stroller by lifting up on the COMBI Infant Car Seat/Carrier handle.
-8 -
COMBI International Corporation •
